MMS (Master Mineral Solution) is the name given for Chloride Dioxide by Genesis Church founder, Jim Humble in 2006. His ministry is largely responsible for the popularization of using Chloride Dioxide as a common folk remedy or religious sacrament.
Since then, the trend is for companies to make Chloride Dioxide in a two-part liquid kit including one part Sodium Chlorite and a second part activator. These are mixed in a one-drop to one-drop ratio, allowed to activate for 30 seconds. The activated solution is mixed with distilled water and used as water purifier.
Humble’s claims suggest that the solution can help rid sufferers of certain ailments or disease by ingesting small doses of the activated mixture.
How to Make MMS
Originally, MMS was created by making the Sodium Chlorite solution from 80% sodium chlorite powder or flakes. The optimal target for strength for Sodium Chlorite solution is 28% (72% distilled water).
Here are the basic ingredients:
80% Sodium Chlorite powder or flakes (available here).
Distilled water
You will also need
A 1-liter plastic container with lid
Instructions to make just under 1 liter or 28% Sodium Chlorite solution.
- Put 9.87 oz. of 80% Sodium Chlorite flakes or powder into a 1-liter plastic (or glass) bottle
- Add 25.4 oz. of distilled water to the bottle containing the flakes or powder
- Shake or stir (if stirring, do not use metal utensils, glass, or plastic only)
Note: pre-measured 80% Sodium Chlorite flakes available here.
Your 28% Sodium Chlorite is ready to use.
You will also need an activator.
50% Citric Acid Solution
On a 1-liter plastic bottle, mix 13 oz. of citric acid with 13 oz. (1-to-1 ratio) of distilled water for 26 oz. of citric acid activator.
Equipped with one bottle of 28% Sodium Chlorite and 50% Citric Acid, you are now prepared to make MMS (Master Mineral Solution).
Instructions to make MMS (Master Mineral Solution):
In a dry small glass (like a shot glass) place an equal number of drops of 28% Sodium Chlorite and 50% Citric Acid (1-to-1 ratio).
As the drops are activated over the next 30 seconds, the color will change to a yellow to brownish color, and the mixed drops are ready to add to drinking water.
How to Make 1 Quart MMS Purified Water Drink
To prepare a 1-quart drink mixture of MMS add three activated drops each of 28% Sodium Chlorite and 50% Citric Acid (six drops total allowed to activate for at least 30 seconds) in a shot glass to 1 quart of water.
Shake or stir mixture and allow to set for 10 minutes. If water is very cold, allow to stand for 20 minutes before drinking.
These are the basic instruction for how to make your own MMS from 80% Sodium Chlorite flakes or powder, including basic MMS recipe, how to mix and use MMS, including a 1-quart example.
MMS is a common nomenclature promoted by Jim Humble, it represents a water purification drops solution which is also used in commercial kitchens around the globe as a microbial agent.
Over 20 years ago, The American Society of Analytical Chemists stated that, “Chlorine Dioxide is the most powerful pathogen killer known to man.”
Many people prefer to use the two part Natural Antibacterial Cleaner Solution (NACS) kit for ready-to-mix drops, available here.
